connectors (inlets/outlets) 6 0-3 www.schurter.com/pg0 7 connectors iec appliance inlet c16, screw-on mounting, front or rear side, solder or quick-connect terminal 6110-3 c16 120 c description - panel mount: screw-on mounting from front or rear-side - appliance inlet, pin temperature 120 c, protection class i - solder terminals or quick connect terminals approvals - vde license number: 40015595 - ul license number: e96454 other versions on request - types for rivet mounting available upon request - sealing (ip54) of appliance and power input - types for enhanced glow wire test requirements acc. iec 60695-2- 11 to -13 for the use in unattended household equipment acc. iec 60335-1 references general product informatio n weblinks approval s , roh s , china-roh s , mating connector s , e-stor e , distributor-stock-chec k , accessorie s technical data ratings iec 10 a / 250 vac; 50 hz ratings ul/csa 15 a / 250 vac; 60 hz dielectric strength > 2 kvac between l-n > 2 kvac between l/n-pe (1 min/50 hz) allowable operation temp. -25 c to 120 c degree of protection from front side ip 40 acc. to iec 60529 protection class suitable for appliances with protection class 1 acc. to iec 61140 terminal solder terminals or quick connect ter - minals panel thickness s screw: max 8 mm mounting screw torque max 0.5 nm material: housing thermoplastic, black, ul 94v-0 appliance inlet c16 acc. to iec/en 60320-1, ul 498, csa c22.2 no. 42 (for hot con - ditions) pin-temperature 120 c, 10 a, protection class 1 dimensions 48 mm 6110-3 max.r3 m3 min.20 min.27.5 40 3.5 2.5 6.3x90? 48 40 23 e 5 e: solder terminals 20.5 mm e: quick connect terminals 23.5 mm
connectors (inlets/outlets) 6 0-3 www.schurter.com/pg0 7 connectors variants type panel mounting panel thickness s [mm] terminal order number 6110-3 screw - - 6110.3200 6110-3 screw - quick connect terminals 6.3 x 0.8 mm 6110.3300 6110-3 screw - solder terminals 3.8 x 0.8 mm 6110.3100 option with ip54 sealing protects from entering fluids and dust into the appliance and the power input. this option can be ordered with ending ".30" (61xx.xxxx.30). the sealing to the appliance on its own (no protection of power input) is available as accessory (sealing kit). articles for enhanced glow wire test requirements acc. iec 60695-2-11 to -13 can be ordered with ending ".15" (xxxx.xxxx.15). they are suitable for the use in unattended household equipment acc. iec 60335-1. packaging unit 50 pcs accessorie s description sealing ki t sealing for appliance inlets ip 54 0098.0103 cord retaining kit s cord retaining strain relief flat head, a 4700.0001 mating outlets/connector s category / description connector overview complet e iec connector c15, rewireable, straight 010 1 iec connector c15a, rewireable, straight 010 2 iec connector c15a, rewireable, straight 0102- g iec connector c15a, rewireable, angled 011 2 iec connector c15, rewireable, straight 478 1 connector further types to 6110- 3 ... power cord overview complet e power cord with iec connector c15, straight, 120c 336 6 power cord with iec connector c15, angled, 120c 336 8 power cord further types to 6110- 3 the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|
